Bushnell CF 500 Reticle Instruction Manual

Riflescope Instruction Manual 10-13

10APPENDIX A: FOR MODELS WITH THE CF500 RETICLEHOW TO USE THE CF500 RETICLE1. Sight in at 100 yds on any magnication setting.2. Determine distance

11APPENDIX B: FOR MODELS WITH THE MZ200 RETICLEABOUT THE MZ200 RETICLEThe MZ 200 reticle gives hunters a series of aiming points that correspond to va

12150 yds.200 yds.100 yds.Based on a 100-yard zero and the ballistics of the most common magnum loads for in-lines.MZ 200In-Line MuzzleloadersAPPENDIX

13APPENDIX B: FOR MODELS WITH THE MZ200 RETICLEHOW TO USE THE MZ200 RETICLE1. Sight in at 100 yds on any magnication setting2. Determine distance t

14100 yd Sight-In 150 yd Sight-In150 yd Mark200 yd Mark150 yd Mark200 yd Mark.45 cal 225 gr HP Copper Clad BC=.176 100 grains 150 200 180 225.45

15USING THE BDC DIALS WITH YOUR BANNER RIFLESCOPE1. SIGHT-IN YOUR RIFLE AT THE RANGE WITH THE BDC SCOPE (Model 713510 & 713946)• With the riesc

16 3. INSTALL THE DIALOnce you have selected the proper dial, install it in the reverse order of Fig A and B, being careful to align the 100 yd mark w

173. Model 713510 only – although the scope can be used for any caliber, it is ideal for the 17 caliber loads. A special chart has been included for

We are so proud of our Bushnell® Banner® Riflescopes that their materials and workmanship are warranted to be free of defects for the life of the binoc

2EyepieceFast FocusRingPower Change RingElevation AdjustmentShoulderWindage AdjustmentObjective LensCongratulations on your choice of a Bushnell® Bann

www.bushnell.com©2013 Bushnell Outdoor Products

3EYEPIECE FOCUSINGThe eyepiece is designed to provide a precise fast focus. The eyepiece will focus faster than your eye can compensate for any inaccu

4(We strongly recommend that those unfamiliar with proper procedures have the scope mounted by a qualied gunsmith). Should you decide to mount it you

5ZEROINGFinal sighting-in of your rie should be done with live ammunition, based on your expected shooting distance. If most of your shots will be at

6RESETTING THE ADJUSTMENT SCALE RING (this feature is not available on all models)This step is not necessary, but, for future reference, you may want

7the Objective Adjustment Ring and align the number with the distance index dot. An alternative method is to look through the scope and turn the Objec

8APPENDIX A: FOR MODELS WITH THE CF500 RETICLEABOUT THE CF500 RETICLEThe CF 500 reticle gives hunters a series of aiming points that correspond to var

9300 yds.400 yds.500 yds.Based on a 100-yard zero and the ballistics of the most common magnum loads.With MOA dots as the long-range aiming points, th