PROUD USA COMPANYLit #: 98-2293/05-12This manual should only be used for Elite Tactical Riflescopes with these reticle designs:Bushnell Mil Dot Retic
10Example 2: Take the same size target but now the Mil reading is .75 (from crosshair intersection to bottom of first Mil Dot). Known size of target:
11= HoldoverTrajectoryMil Size at given DistanceFEDERAL .308 168-GR BTHP HOLDOVERS FOR A MIL-DOT RETICLEDistance Trajectory 1 Mil Size Actual Holdover
12USING THE MIL DOT RETICLE FOR HOLDOVER Once you know how to range your target with the Mil Dot reticle, and using the previous example, you can use
13BUSHNELL G2DMR™ RETICLE The G2DMR reticle, developed in conjunction with G.A. Precision, provides a clean reticle space while giving you the ability
14THE HORIZONTAL CROSSHAIR On the horizontal crosshair, numerically designated Mil markings extend from the center of the crosshairs outward to the ri
15Extending past the 8 Mil mark, the numerals stop. 1 Mil increments are then designated by the longer hash marks which measure 1.5 Mil in height from
16THE VERTICAL CROSSHAIR Similar to the horizontal crosshair, the vertical crosshair places the numerically designated Mil markings on only one side.
17HORUS VISION H59 RETICLE The H59 reticle is a “field-tuned” version of the H58 reticle from Horus Vision. The horizontal grid is widened by one mil f
18This process works well for many cartridges and weapon systems,but not all will impact exactly the same. However this system should place you close
19HORUS VISION TRMR2 RETICLEThe TRMR2 is a refined-mil reticle. Precision mil-marking clusters interspersed throughout the reticle enable fast accurate
2Fast Focus EyepiecePower Change RingSide Focus AdjustmentElevation TurretWindage TurretSunshade
20This process works well for many cartridges and weapon systems, but not all will impact exactly the same. However, this system should place you clos
21CALCULATING HOLDS FOR MOVING TARGETS The TRMR2 reticle has 14 wind dots left to right. 7 wind dots to the left and 7 wind dots to the right of ce
22RETICLE FROM 10TH MIL TO 38TH MIL DOWN ON VERTICAL STADIAThe standard Horus grid is found from the 10th Mil down on the vertical stadia to a total o
23MAINTENANCEYour Bushnell Elite Tactical HDMR riflescope, though amazingly tough, is a precision instrument that deserves reasonably cautious care.1.
24WARRANTY / REPAIRELITE® LIFETIME LIMITED WARRANTYWe are so proud of our Bushnell® ELITE® Tactical HDMR™ Riflescopes that their materials and workmans
25IN U.S.A. Send To: IN CANADA Send To:Bushnell Outdoor Products Bushnell Outdoor ProductsAttn.: Repairs Attn.: Repairs9200 Cody 25A
27
For further questions or additional information please contact:Bushnell Outdoor Products9200 Cody, Overland Park, Kansas 66214(800) 423-3537www.bushne
3ELEVATION AND WINDAGE TURRETSThe turrets of the Bushnell® Elite® Tactical Riflescope provide audible and visual references. Each turn of the turret pr
4FAST FOCUS EYEPIECE The fast-focus eyepiece dial is found on the ocular end of the Bushnell Elite Tactical Riflescope. Use this adjustment to obtain a
5FIRST FOCAL PLANE RETICLE The Bushnell Elite Tactical Riflescopes covered by this manual have their reticles located in the first focal plane. Therefo
6In the example to the left using the H59 reticle, the shooter was attempting to hit a target in the center of the crosshairs. The actual point of imp
7BUSHNELL MIL DOT RETICLE The Bushnell Mil Dot Reticle provides a total of ten Mils on both the vertical and horizontal crosshairs. One Mil is measure
8The Mil Dot Reticle Measurement System in the First Focal Plane Applies at any Magnification Level.2 Mils at 12x (100 yards)2 Mils at 3.5x (100 yard
9USING THE MIL DOT RETICLE FOR RANGING The Equations: Size of target in yards X 1000 = Range in Yards Size of Target in MilsSize of target in inc
Comments to this Manuals