Model# 119204 (Std) / 119305 (NV) / 119505 (Camo NV)LIT #: 98-1164/03-08Instruction ManualTRAIL SENTRY™Digital Trail Camera Standard SentryNight Visi
10After setting the start hour for “Day”, press ENTER and the “Star&Moon” icon will blink. Press ENTER and set the hour to dene the star
11 9. Thread the strap through the slots on the back of the Sentry and attach the buckles, then strap it onto a suitable tree, making sure the strap
12 ABOUT THE PIR SENSORe sensor that triggers the trail camera is Passive Infra Red, or PIR. Infrared energy is essentially heat energy. e PIR detec
13OPTIONAL ACCESSORIES FOR THE BUSHNELL TRAIL SENTRYRatcheting Bracket (Bushnell Model # 11-9650C)An optional ratcheting bracket is available for all
Solar Panel (insert plug into camera input jack) Solar Panel Power Input JackSolar Panel (Bushnell Model # 11-9750C)(Compatible only with Trail Sentry
FCC Note:is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rul
©2008 Bushnell Outdoor ProductsFor further questions or additional information please contact:Bushnell Outdoor Products9200 Cody, Overland Park, Kansa
2Congratulations on your purchase of the Bushnell® Digital Trail Sentry™ Camera! is weatherproof, rugged trail camera is designed to record still ima
3 QUICK GUIDE: BUSHNELL TRAIL SENTRY (Standard and Night Vision Models)1. Open the camera by releasing the latches on the right side of the
4 QUICK GUIDE: BUSHNELL TRAIL SENTRY (Standard and Night Vision Models)6. (Night Vision models only) After selecting still photo or movie clip
5Digital Trail Sentry SpecicationsImage Sensor 2.1 MP (Standard model) or 3.1 MP (Night Vision models) CMOS sensor Lens F/3.5, eective focal lengt
6GlossaryPIR—Passive Infrared Sensor. Senses motion like typical security motion detector. Requires infrared energy (heat) in addition to motion to
7Parts GuideFront of CameraControl Panel Inside FrontButton & Display DetailSD Card SlotLCD DisplaySetup, Menu & Power ButtonsPIRPIR Detected
8Setup and Operation Guide1. Open the Sentry by pulling out on the two latches on the right side. Install 4 “D” cell batteries (at base of all batter
9Setup Guide (cont.)last two digits blinking (“20_ _”) (d). Again use the Up/Down buttons to change the year if necessary, press enter, and set the ti
Comments to this Manuals