Bushnell 11-0718 User Manual download pdf (Page 4)

Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please

read these instructions and take time to familiarize yourelf with the different parts and features of the

product.

BINOCULAR INSTRUCTIONS

TURNING THE CAMERA ON

AND OFF

Insert 2 AAA alkaline batteries as

indicated on the inside lid of the

battery compartment, located at the

side of the left eyepiece. Turn the

camera on by pressing and holding

the MODE/POWER( ) button

until the display comes on and the

camera beeps. To turn the unit

off, press and hold the MODE/

POWER(

) button until the display

goes out. The camera will turn itself

off automatically to save batteries

if none of the buttons have been

pressed for three minutes.

SNAP

(Shutter Release)

MODE / POWER (On/Off)

TAKE A PHOTO (TIPS FOR BETTER QUALITY PHOTOS)

With the camera turned on, press the SNAP button to take a new photo. For best

results, hold the ImageView steady using both hands, and lightly press down the SNAP

button using the flat end of your finger rather than “punching” it with a fingertip. For

normal photos of distant objects over 25 feet (8 meters) away, leave the 2-position focus switch at the

front of the camera on the “mountain” icon (left position). If you need to take photos of closer objects,

set the focus switch to the “flower” icon (right position). This will change the camera focus to a range

from approx. 10 to 25 feet (3-8 meters). Be sure the focus switch is set back to the normal (mountain)

setting when you are no longer taking close range photos.

USING THE IMAGEVIEW WITH YOUR COMPUTER

BEFORE CONNECTING THE IMAGEVIEW TO A COMPUTER, first install the driver from the

CD-ROM as directed in “Software Installation”. After the driver has been installed, you may install

Roxio“ PhotoSuite 5 as well, following the on-screen instructions (if you do not already have photo

software you prefer to use). Connect the supplied USB cable between the ImageView and your computer,

using a USB port on the computer itself (avoid “hubs”). Please read “Downloading Photos to Your

Computer” for detailed instructions on transferring photos to a PC using PhotoSuite.

11-0718 6LIM.indd 6-7 7/19/04 8:50:24 AM

1 2 3 4 5 6 7 8 9 ... 42 43

No comments

Bushnell 11-0718 User Manual Page 4