Bushnell 18-0833 User Manual download pdf (Page 10)

Group Item Icon Description

Delete & lock Lock /

Unlock

Locking a photo or video ﬁle prevents accidental erasure. Can

be used together with “Delete All” to quickly delete all but one

or two photos. To lock the currently displayed photo or video,

highlight the “Lock” icon and press “OK”. To unlock a previ-

ously locked ﬁle, select it using the Up/Down arrows, highlight

the “Lock” icon again, and press “OK”.

Thumbnail Thumbnail Provides an overview of up to nine photo/video ﬁles at once, al-

lowing easier , faster selection of an individual photo in a group

for review. Highlight the Thumbnail icon and press OK. Use the

arrow buttons to select a photo. Keep pressing the Down or Right

button to go to the next group of photos. Press OK to see a se

lected photo in full screen view.

Magnify

(Not available

during video

review

)

Magnify Provides a closer view of a photo to check for sharpness or other

details. Highlight the Magnify icon and press OK to see the mag

niﬁed view. Arrow buttons allow moving around in the magniﬁed

view. Press OK again to go back to a normal view, then return to

the Review Menu.

Exit Exit Exits the review menu and returns to the last selected review im

age.

System Requirements (Minimum)

Software Installation

Transferring The Photos & Videos to Your PC - Step by Step

OS: Windows® 98/98SE/2000/ME/XP

CPU: MMX Pentium® 200MHZ equivalent or faster (

Pentium® III 500 MHz for PhotoSuite5™)

Memory: 32MB minimum (64MB recommended for PhotoSuite)

SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color

200 MB available hard disk space (if installing PhotoSuite)

Internal USB Port

If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM

into your computer’s CD drive; it will auto-run and the install screen will be displayed. Select “Install Driver”, then

follow the directions. After installation, restart your computer. Windows 2000, ME, and XP do not require drivers,

as the camera uses the USB mass storage standard , allowing the photo ﬁles to be accessed as if they were stored on

an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may

install Roxio PhotoSuite® from the CD-ROM. Be sure to read the “Release Notes” completely, noting any tips or

potential issues relevant to your PC conﬁguration and OS.

1. Be sure the driver has been installed ﬁrst if you are on Windows 98/98SE.

2. Make sure the Instant Replay power is on and connect the supplied cable to the camera’s USB port (open the

connector cover on the left side of the Replay), then directly to a main USB port on your computer-do not use front

panel/keyboard USB ports or unpowered “hubs”.

3. The LCD display will turn off to conserve battery power

, and the Instant Replay will be recognized as a standard

“USB Mass Storage” device. This means that the camera ﬁles can be easily viewed, edited, or copied to your hard

drive, just as if they were stored on an external hard drive or a CD-ROM.

Review Menus continued

18-0833 6LIM.indd 18-19 1/28/05 2:47:42 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 72 73

Comments to this Manuals

No comments

Bushnell 18-0833 User Manual Page 10

Comments to this Manuals

Related products and manuals for Optical devices Bushnell 18-0833